POWER BANKS

​

OWNER’S MANUAL

​

Thank you for purchasing this FIFO/MyMe Back-up Power Charger. Please read this manual carefully. It contains important operating instructions. This unit is designed for charging standard USB devices.

​

SPECIFICATIONS:

Input: 5V DC @ 1A (Unless otherwise stated)

Output: 5V DC @ 1A (Unless otherwise stated)

Operating Temperature: 10°-40°C

Capacity: 4,400mAh (Unless otherwise stated)

Cell Type: Li-Polymer

​

SAFETY PRECAUTIONS

1. Do not short circuit.

2. Do not try to use this power supply with appliance requiring more than 2.1A.

3. Do not attempt to open this unit.

4. Please unplug the cable when not in use

5. Do not use if unit appears to be damaged.

6. Do not use device near water or when wet.

7. Position cables carefully, so as not to cause a trip hazard

8. For longer cables, keep out of reach of children

9. Avoid any damage to the Power Bank especially from impact.

10. Store in a cool, dry place at temperatures between -40°C and 45°C and in relative humidity below 75%.

11. Avoid contact between the device and corrosive substances and fire.

12. Do not short circuit.

13. Ensure correct voltage is used as continuous excessive voltage could damage your equipment.

14. Do not try to use this power supply with appliances requiring more than 1A.

15. Do not attempt to open this unit.

16. Do not use if unit appears to be damaged.

17. Please disconnect device when not in use.

18. Do not use device near water or when wet.

19. Please ensure the Power Bank is charged periodically (at least once every six months) to maintain its charging capacity.

INSTRUCTIONS FOR USE​

1. Before using, check your device’s input voltage and this Power Bank’s output voltage to ensure compatibility. Make sure the total load does not exceed the rated output current of this charger.

2. Before using the Power Bank, connect it to an appropriate USB power source using the USB-Type C cable included to charge it (ensure the smaller Type C end of the cable is connected to the Power Bank and the larger USB A end of the cable is connected to the USB Power Source). 

3. The 4 LED lights should start blinking to indicate that the Power Bank is being charged.

4. When the LED Lights is flashing, it means that segment is charging. When the LED Light becomes a solid light that means that segment is charged. I.E 2/4 LED lights are a solid light with the 3rd flashing and 4thnot lighting, this means the first two are charged, the 3rd one is currently charging, and the 4th isn’t charged yet. 

5. To use the Power Bank to charge your device, connect the larger USB A end of the cable to the Power Bank and the smaller Type C end of the cable to the device you want to charge. To connect to devices that don’t use USB Type C, please use a compatible adapter or an alternative USB cable.

6. For Power Banks with a wireless charging feature (46661):

   • If you are using the Wireless charging feature to charge your device, please check first that your device is compatible with wireless charging. 

   • The powerbank has a magnetic feature that allows it to stick to devices that are Magsafe compatible. If your device is not Magsafe compatible, but has wireless charging capabilities, then you can still use the powerbank to your device, but it will not magnetically stick to your device, unless you use the included metal ring. 

   • The included metal ring has a self adhesive sticker which needs to be carefully positioned around the wireless charging section of your device, peeled and stuck in place. 

   • Once stuck in position, on your device or on your device’s case (as long as the case is not too thick for wireless charging) the metal ring should hold the wireless charging powerbank in place during charging. 

   • Please note that although the magnet is strong, it can fall off if the device is not held securely or moved about quickly. 

7. Once your device is connected, the LED lights on the Power Bank should begin to blink to indicate that your device is charging. If using the wireless feature, Click the power button once for it to turn on and the LED lights will flash on and stay lit during the duration of the time it is charging. 

8. Once charging is complete, your Power Bank should go into sleep mode and stop charging. If you disconnect the Power Bank and reconnect it to your device, it may take up to 15 seconds for the Power Bank to start charging your device again.

9. If the Power Bank does not begin charging your device, please check the connection, that the powerbank is turned on and that the Power Bank has been charged.

10. When you have finished charging your device, please remove the cable & double press the power button to turn off. If using the wireless feature, remove the Power Bank from the back of your device and double press the power button to turn it off.

11. When the Power Bank is out of power, please re-charge it by connect it to an appropriate USB power source using the USB – Type C cable.

AFTER-SALE SUPPORT

If you discover that this product contains a manufacturing defect which affects the operation of this device, you may return it to any site in the UK that sells MyMe accessories and exchange it for a new MyMe item of the same value, subject to availability. This does not affect your statutory rights. If you experience any problems obtaining a replacement item or require any other assistance, please contact via our email: support@fifouk.com

​

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Imported by: iLead Mobile Limited, B38 9PN, +44 121 4599423.